Glasses are very useful not only in construction work but also in artistic endeavors. In fact, sculptures were made through the use of this material from thousands of years back. The glass pipes of today may be involved in a more advance process, but there is no denying that some remnants of the past civilizations are still existing, and in their full form.
This craft has existed for a long time now and history has seen the developments through the years. Artists of the present look pack to past disciplines because this is where they draw their inspiration from. They fuse this with the newer technology that has emerged through years of research and improvement.
Glasses are very vulnerable, thus they are prone to breakage with a drop. However, they are also very regal when fashioned into sculptures and other embellishments. This dual nature is what makes the process a challenging but rewarding one for the artist who pours his or her heart into the vision.
While others are aware that there are sculptures made out of glasses, they often wonder how the process go. After all, it looks hard to manipulate and is a risky endeavor because of the possibility of breakage. These questions can be answered by a study of the material, the techniques used in each processing type and how to put some artistic sense into the creation.
One of the most known types is the blowing process which requires the use of soda lime and sand combined. With the addition of the coloring agents, the raw material has to be prepared, melted and then shaped through the use of specials and an awareness of each step in the process. Once done, this should be followed by the cooling so that the material will return to its most solid state.
There are many limitations that have to be kept in mind to ensure that the work of art appear as intended. A quicker cooling time would be risky for the structure because there is the higher tendency of breaking apart. Meanwhile, if there are already existing cracks, then this could be triggered to cover a wider scope through added pressure.
Opposite to this is the method of hot sculpting which does not require the process of blowing. This method is preferred when the artist intends to come up with larger pieces for the end result. Quite similarly, you also need special tools to do the shaping and forming of the molten batch.
Throughout the decades, many known and underrated artists have emerged to influence the craft. Then again, it is important to look back to the masters who have existed when this interest wast just starting out. With the lack of proper technology and inspiration to emulate, they have successfully made their creations through gut feel and a good understanding of the process despite the lack of knowledge.
Mastering techniques for glass pipes takes a lot of time and dedication. Moreover, you need to have the creative flair to be able to understand aesthetics and how to achieve them. From inspirations of the past and modern day visuals, you can always start that crucial step towards learning the craft.
This craft has existed for a long time now and history has seen the developments through the years. Artists of the present look pack to past disciplines because this is where they draw their inspiration from. They fuse this with the newer technology that has emerged through years of research and improvement.
Glasses are very vulnerable, thus they are prone to breakage with a drop. However, they are also very regal when fashioned into sculptures and other embellishments. This dual nature is what makes the process a challenging but rewarding one for the artist who pours his or her heart into the vision.
While others are aware that there are sculptures made out of glasses, they often wonder how the process go. After all, it looks hard to manipulate and is a risky endeavor because of the possibility of breakage. These questions can be answered by a study of the material, the techniques used in each processing type and how to put some artistic sense into the creation.
One of the most known types is the blowing process which requires the use of soda lime and sand combined. With the addition of the coloring agents, the raw material has to be prepared, melted and then shaped through the use of specials and an awareness of each step in the process. Once done, this should be followed by the cooling so that the material will return to its most solid state.
There are many limitations that have to be kept in mind to ensure that the work of art appear as intended. A quicker cooling time would be risky for the structure because there is the higher tendency of breaking apart. Meanwhile, if there are already existing cracks, then this could be triggered to cover a wider scope through added pressure.
Opposite to this is the method of hot sculpting which does not require the process of blowing. This method is preferred when the artist intends to come up with larger pieces for the end result. Quite similarly, you also need special tools to do the shaping and forming of the molten batch.
Throughout the decades, many known and underrated artists have emerged to influence the craft. Then again, it is important to look back to the masters who have existed when this interest wast just starting out. With the lack of proper technology and inspiration to emulate, they have successfully made their creations through gut feel and a good understanding of the process despite the lack of knowledge.
Mastering techniques for glass pipes takes a lot of time and dedication. Moreover, you need to have the creative flair to be able to understand aesthetics and how to achieve them. From inspirations of the past and modern day visuals, you can always start that crucial step towards learning the craft.
No comments:
Post a Comment